Reloop Spin 2!

[ToTi]

Hi, I'm Spanish, I buy the Reloop Spin 2, two days ago and I can not configure it.
the installation went well but the driver I had to download it for Windows 7.
would want to know how to connect everything to their good configuration.
my team consists of:
2x American Audio TTD 2400 USB
1x Behringer DX626 3 Channel
1x Reloop Spin! 2

[Reloop_Support]

please check our step by step tutorials for an easy setup:

http://www.youtube.com/user/ReloopDJcom#grid/user/26A294A4E454E598

[ToTi]

In the Easy Setup, when you calibrate the one player told me:
"SPIN! has NOT Been calibrated properly"
I have seen all the tutorials but none configured manually SPIN

[Reloop_Support]

please post screenshots of
- about spin
- general software screenshot
- options -> audio device
- options -> timecode tab (when both records are playing)

[ToTi]

This is the Sreenshot

[Reloop_Support]

your asio installation seems not be correct.
do not connect the device, now execute the newest and RIGHT asio driver for your system (update from download center), then connect the device when it ask's you to, then reboot.

in spin you have to choose under audio device (spin asio)

check the tutorial for how it should look

[ToTi]

The connections are:
The Turntable Left: Ouput Line(R/L) -> Input Spin 1(R/L)
The Turntable righ: Ouput Line(R/L) -> Input Spin 2(R/L)
The MIxer: Ouput Spin (THRU1) -> Line Input 2 (channel 2)
                 Ouput Spin(THRU2) -> Line Input 3(channel 3)

the buttons on the back of the spin (PH / LN) are pressed

[Reloop_Support]

OUTPUT of SPIN INTERFACE have to go to the LINE INPUTS of the mixer (NOT THRU!!)

(the thru ports are for the PHONO INPUTS of the mixer - for the normal vinyl signal)

[ToTi]

Thanks, already are connected well, now I get an error when I install the driver for windows 7
(Spin 2 USB ASIO Driver 2.8.40)
The error is:
"Unfortunately the installation failed. (Error: 0x0007)"

[Reloop_Support]

please follow the steps i have described for installation. use power supply and connect directly to the usb port at the rear side from your computer

[ToTi]

I have already installed the correct driver and I restarted the computer ...
Now I get this window.
I should do next ....

[ToTi]

I think this is the problem

[Reloop_Support]

you have to select as asio device "SPIN! 2 USB ASIO" not the ASIO4ALL - you have the Spin! 2 Interface or not?

[ToTi]

if I have the Reloop Spin! 2 interface but I have selected the "SPIN! 2 USB ASIO" because in the spin 2 interface shows me as not conected

[ToTi]

I'm going crazy